Image	Description
	JCL MODEL#: MP150B KS Power 1205 South Jefferson Way Indinola, IA 50125 515-309-1722 kickstartps@hotmail.com This is a JCL MP150B that KS Power built and raced at Pinks All Out on March 21st at Ennis Motorplex. Below is a list of parts and specs. JCL MP150B, Scratch and Dent Special Linhai-Yamaha GY-6 63mm JE 13.5:1 Forged Piston, Stock Crank Custom Titanium Retainers, Valve Springs, +2mm Valves, A-11 Cam Port and Polish by Jason Experimental High Rise Intake NO CHARGING SYSTEM, NO STARTER CLUTCH, total loss ignition system w/ adjustable advance Genuine Keihen 32mm CVK w/ Manual Choke Shinko 150mm Fatty Rear Tire, thank you WPS!!! Experimental Variator and small diameter clutch Dr. Pulley Sliders MRP Ball Bearing Spring Base MRP Torque Driver Gates Powerlink Belt Broke the kickstarter, starts w/ external starter from Dodge Caravan Tri Oval Stainless Exhaust Honda moped oil injection tank, became a fuel tank Sunoco Standard 110 Octane Fuel Joe Gibbs XP1 Racing Oil Rigid Rear Strut Lowered 4” Stretched 6” Trellised Frame Nitrous System had to wait, some dummy at Fenders broke the Damn Dyno!!! AGAIN!!! Going to film at Pinks All Out Saturday, we will be running this @ Eddyville Dragway and Newton Speedway this summer. March 26, 2009, 10:11 am
	JCL MODEL#: MAS-110ER-7 KT Motorsports 7909 Desiard ST. Monroe, LA 71203 318-342-0626 becky@ktmotorsports.net This is a JCL MAS-110ER-7 that we have add ITP Alum wheels and ITP Holeshots too. We just got done powder coating the rear rack orange and adding a FMF pipe to it. Those picture coming soon. March 25, 2009, 4:28 pm
	JCL MODEL#: MP150C KS Power 1205 South Jefferson Way Indinola, IA 50125 515-309-1722 kickstartps@hotmail.com This is a JCL MP150C that Nick and Jason from KS Power built for JCL to race and display at shows. Joel at MRP Racing provided all the aftermarket parts for this bike. Thanks Joel!! This bike was raced by Tony at JCL during a Pinks All Out event at Texas Motorplex on March 21st. This scooter can still be driven on the street and with a turn of a nitros bottle can be run down the drag strip. Here is a list of parts on the scooter and contact info. This is the list and part numbers of the parts from Joel at MRP Racing. You can contact your local MRP Dealer for more info on these parts. MRP 1 MP-09519 63mm cylinder kit 1 MP-09444A 61mm Performance Head 1 N-MP-09445-2 +2 Stroker Crank 1 N-MP-07103 32mm CVK Carb 1 TM66 TK EVO2 Variator 1 UNI-CLUTCH-181401 Dr. Pulley Hit Clutch w/ Bell 1 MP-03524 GY-6 Slide Face 1 MP-03566 Ball Bearing Spring Base 1 MRPGY6CDIADJUST Adj. CDI Box 1 MP-07072 Performance Intake Manifold 1 MP-09448-1 Racing Camshaft 1 N-MP-09551 Oil Cooler Kit 1 N-MP-09045-1 Complete GY-6 Gasket Set 62mm 1 M4T34N TK GY-6 Exhaust System 1 MP-01175 High Output Ignition Coil 1 N-MP-07239 LED Air Filter Assembly 1 N-MP-03401-2 Red Main/Torque Spring Then here is what was done by Nick and Jason at KS Power. KS Power Parts 1 2mm Stroker Kit Spacer 1 GY-6 Nitrogen Shocks 1 Forged 63mm JE Piston 1 Magnetic Drain Bolt Kit 1 Turbo 2 Fan 1 Race Gear Set 1 High Lift Valve Spring Set 1 NOS w/ WOT switch 1.5lb 1 First Fill on NOS 1 Misc Hardware Engine Labor Bore Cases Port Polish Head Clearance and Cut Crank Balance Rotating Assembly Press Gear set Disassemble/Assembly Labor Lighten Flywheel(Optional) Chassis Labor Remove engine, replace shocks Electrical Labor, LED, NOS, Ignition Carb Tune Tune Transmission Dyno Tune Keep an eye out for the Pinks All Out at Ennis Motoplex on the Speed Channel to see this scooter run. I would like to thank Joel at MRP Racing for all the parts he gave us to build this scooter. Id also like to thank Nick and Jason from KS Power for the parts they put on and all the labor they put into the scooter and then trailering it from IA to Tx so that we could race at the Pinks event. Nick i hope your still not mad that i beat you down the track? Lol. March 25, 2009, 3:26 pm
	JCL MODEL#: MAS-450A Midwest ATV Performance 3800 Ross Lane Chanute, KS 66720 620-431-3698 mike.dupuy@sbcglobal.net This is a JCL MAS-450A that we tricked out and are racing on a TT circit. updated March 19, 2009, 7:52 am
	JCL MODEL#: FS-208E Outdoors N More 21699 E 71st ST. Broken Arrow, OK 74014 918-286-3696 paul@getoutdoorsnmore.com This is a JCL FS-208E 125cc Dirtbike that we added a Rockstar Energy sticker kit too. March 18, 2009, 3:55 pm
	JCL MODEL#: FS-208E Outdoors N More 21699 E 71st ST. Broken Arrow, OK 74014 918-286-3696 paul@getoutdoorsnmore.com This is a JCL FS-208E 125cc dirtbike that we did a Monster Energy sticker kit on. updated March 18, 2009, 3:14 pm
	JCL MODEL#: MAS-125A-1 Outdoors N More 21699 E 71st ST. Broken Arrow, OK 74014 918-286-3696 paul@getoutdoorsnmore.com March 17, 2009, 2:25 pm